EPS HARD COAT

Description

Industrial Abrasion Resistant Spray Coating

HardCoat is normally applied by a SprayEZ-3000 high pressure plural component pumping machine but may be applied low pressure cartridge systems. It becomes tack free in 15-30 sec with a 48 hour cure time to acquire its design hardness and wide functional temperature range from -20F to 150F. This durable and weather-resistant polyurea coating may be color pigmented and finishes to smooth surface.

HardCoat is an industrial abrasion resistant spray coating to be used over low density substrates such as polystrene foam and polyurethane foams which require exterior surface hardnesses up to 70 Shore D. It also provides excellent chemical and moisture resistance. This material is a two component 100% solids and contains no VOCs or solvents ot dissolve substrates. These specialized urea formulations deliver optimal curing application in very cold or hot climates. HardCoat may also be used directly on clean primed metals, woods, fiberglass, concrete and masonary without the use of primers. Water-based primers may be used over typical foam substrates if desired.

About EPS Hard Coat

SprayEZ’s EPS HardCoat is more than capable of withstanding direct flame contact as an insulating microcellular polymeric material. It would help the situation greatly as EPS HardCoat emits low smoke and flame spread in the event of a fire, making this a precious ally to help diversify the fire protection steps that you have taken in your home or building. EPS HardCoat will also help protect Polystyrene from the weather while offering the rock-hard texture that theme parks find very attractive.

Product Data & Resources

All EPS Hard Coat documentation, manuals and resources available HERE.